Low Flow pump range
The Low Flow pump range of disposable pumps produces a flow range of 0.63 – 33ml/s. The 13mm rotor can has 3 cavities which dispense 0.21ml per cavity. The standard fluid-contacting materials are Polypropylene, HDPE and Nitrile. Alternative materials are possible to suit your liquids. The disposable pumps are available in high-pressure, low-pressure, in-pump dilution configurations, along with a high speed option in development.
To evaluate the technology and choose the best configuration for your application, evaluation kits consisting of a motor, custom controller, easy-to-use software and step-by-step instructions are available. See the catalogue below for the full range of pump and evaluation kit specifications.
Previously known as the Series 13 range. Click here to learn more.
QX25-SD pump (in development)
High vacuum QX25-SD pump pump collapses PET bottle while pumping water.
Single-use disposable pump
Features:
- Flowrate: 0.63 – 6.3 ml/s
- Resolution: 0.21ml
- Pressure: regulating <15psig
- Vacuum: -7psig
- Viscosity capability: <1,000 cP
- Inlet/outlet: barbed connection options for 2.5mm up to 8mm ID tubing
- Weight: 8.2g
- Dimensions: 39 x 39 x 25mm
QX25-HP pump (in development)
High Pressure QX25-HP Spraying Water
Disposable high pressure pump
Features:
- Flowrate: 0.63 – 6.3 ml/s
- Resolution: 0.21ml
- High pressure: up to 58 psig / 4 bar
- Vacuum: -7 psig
- Viscosity capability: <1,000 cP
- Inlet/outlet: barbed connection options for 2.5mm up to 8mm ID tubing
- Weight: 8.2g
- Dimensions: 39 x 39 x 25mm
QX120-DL (in development)
QX120-DL Dilution pump
In-pump dilution (in development)
Features:
- Concentrate flowrate: 0.63 – 6.3 ml/s
- Diluent & concentrate combined max flowrate: 33ml/s
- Resolution: 0.21ml
- Dilution within the pump outlet
- Pressure regulated diluent is provided to the pump
- Precise dilution ratios from 1:1 to 1:250
- Mains Water Pressure: up to 2bar (30psig)
- Vacuum: -7psig
- Viscosity capability: <1,000 cP
- Inlet/outlet: barbed connection options for 2.5mm up to 8mm ID tubing
- Weight: 8.2g
- Dimensions: 39 x 39 x 31mm
QX60-HS (in development)
Recyclable pump with high-speed capability
Features:
- Flowrate: 0.63 – 17.5 ml/s
- Resolution: 0.21ml
- Pressure: regulating <15psig
- Vacuum: -7psig
- Viscosity capability: <1,000 cP
- Inlet/outlet: barbed connection options for 2.5mm up to 8mm ID tubing
- Weight: 7.3g
- Dimensions: 39 x 39 x 31mm
- Easier recycling due to fewer mixed materials
Q-Drive-Alpha
Introducing the Q-Drive-Alpha with a demonstration of its easy-to-use user-interface.
Pump drive system for evaluation and commercial use
Features:
- Plug and play, easy-to-use
- Integrated driver and screen for direct control
- Able to run both Microdosing and Low Flow Pumps (SD and HP models)
- Select and change your flow rate as desired
- Reverse cycle & self-priming functions
Dilution Evaluation Kit
Low Flow pump range Dilution evaluation kit - with QX120-DL dilution pump
Drive system for evaluation of Dilution Low Flow pumps
Comprises of:
- Motor
- Motor controller
- Power supply
- Motor to pump drive connector and chassis
- Tablet computer with easy-to-use software
- Step-by-step instructions
- Stand including solenoid to control diluent
Dilution Evaluation kit allows for the easy evaluation of Low Flow Dilution pumps. This kit is not for commercial use.
Pump finder tool
Use the fields below to help you identify which Quantex pump is most suitable for you. Select the maximum target flowrate that is immediately above your requirements.